Vario-J-Hook (patent protected)

Vario-J-Hook (patent protected)



The new Vario- J-shaped hook is developed for Lifting and Turning of tower segments. During the turning process, the solid safety catch hooks behind the flange. The key innovation is the sliding bearing inner shell (patented), which rotates together with the tower flange during the turning process. Thus, no bending forces are introduced into the flange. All contact surfaces are carefully equipped with the robust secutex impact protection, the flange is secure and protected.

Significant time savings: After the lifting / turning process, the J-Hook can be easily removed by the crane, time-consuming assembly work is not necessary.

On the other hand, firmly screwed attachment points after the turning process time-consuming be dismantled, this must be done below the load. Working under a suspended load is absolutely unacceptable, the load must therefore be placed on blocks, which delays the process considerably.



• Vario-J-Hook XL for extremely large flanges
• Lashing system, so that also very soft towers can be lifted and turned without deformation.

Contact us!

SpanSet Axzion GmbH
Winkelsweg 172
40764 Langenfeld, Germany

Phone: +49 (0) 2173 208920